00TA
Heliport
Sabine Pilots
Port Arthur, Texas

FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:00TA (Zero-Zero-Tango-Alpha)
Lat/Lng:29.9356944444, -93.9855
29-56-08.5000N, 093-59-07.8000W
Estimated by Owner on 04/05/2021
Elevation:17 feet Estimated by Owner on 04/05/2021
Magnetic Variation: [1E (2024)]
Sectional:HOUSTON
From City:4nm NW of Port Arthur

Operations

Use:Private
Ownership:Privately owned
Activation:04/2021
Control Tower:no
ARTCC:Houston(ZHU)Houston Center
FSS:Montgomery County FSS(CXO)
Wind Indicator:Lighted
Landing Fee:no

Communications

Services

Based Aircraft

Total:0

Annual Operations

Total:0

Ownership

Owner:Sabine Pilots
2505 Jimmy Johnson Blvd
Port Arthur, Tx 77640
713-775-7909
Manager:Sabine Pilots
2505 Jimmy Johnson Blvd
Port Arthur, Tx 77640
713-775-7909

Runways

Runways:H1

Runway H1

Length:107 feet
by Owner on 04/05/2021
Width:107 feet
Surface:Porland Cement Concrete, Good Condition
Surface Treatment:NONE

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.