06XA
Airport
J & W Windy Hill
Van Alstyne, Texas

FAA NFDC Information Effective 56-day cycle 05/29/2014 - 7/24/2014

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:06XA (Zero-Six-Xray-Alpha)
Lat/Lng: 33.4459833333, -96.5707972222
33-26-45.5400N, 096-34-14.8700W
Estimated by OWNER on 06/17/2010
Elevation: 784 feet Estimated by OWNER on 06/17/2010
Magnetic Variation: [3E (2014)]
Sectional: DALLAS-FT WORTH
From City: 1nm N of Van Alstyne

Operations

Use: Private
Airspace Analysis: CONDITIONAL
Provided VFR Operations and Pvt Use only; All Traffic Pattern Operations Limited to the North Side of Runway 06/24.
Ownership: Privately owned
Activation: 02/2011
Control Tower: no
ARTCC: Fort Worth (ZFW) Fort Worth Center (ZFW)
FSS: Fort Worth FSS (FTW)
Wind Indicator: Unlighted
Landing Fee: no

Communications

Services

Based Aircraft

Total: 0

Annual Operations

For year ending: 01/31/2009
Total: 0

Ownership

Owner: James Robert Warner
Po Box 306
Van Alstyne, Tx 75495
905-482-6161
Manager: J. R. Warner
1191 Kepler Rd
Van Alstyne, Tx 75495
214-762-2330

Runways

Runways: 06/24

Runway 06/24

Length: 1500 feet
by Owner on 06/17/2010
Width: 50 feet
Surface: Grass / Sod
End 06 End 24
Right Hand Pattern:   Yes
Objects:   Trees
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach
Object Height:   35' AGL
Object Distance:   100' Along centerline

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.