| 0TX2
Heliport
|
Heliport-Facility 5A
|
|
Grand Prairie, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | 0TX2 (Zero-Tango-Xray-Two) |
|---|
| Lat/Lng: |
32.7626305556, -97.0586197222
32-45-45.4700N, 097-03-31.0310W
Estimated
|
|---|
| Elevation: |
546 feet
Estimated
|
|---|
| Magnetic Variation: |
07E,
(1985),
[4E (2013)]
|
|---|
| Sectional: |
DALLAS-FT WORTH
|
|---|
| From City: |
3nm
W of Grand Prairie
|
|---|
| Use: |
Private
|
|---|
| Airspace Analysis: |
CONDITIONAL
VFR only/Two Way Radio Rqrd/for Instrns Contact Dfw ATCT/or Contact Bell Helicopter Textron Tower 123.35.
|
|---|
| Ownership: |
Privately owned
|
|---|
| Activation: |
03/1967
|
|---|
| Control Tower: |
no
|
|---|
| ARTCC: |
Fort Worth Center
(ZFW)
|
|---|
| FSS: |
Fort Worth FSS
(FTW)
|
|---|
| Wind Indicator: |
None
|
|---|
| Landing Fee: |
no
|
|---|
| UNICOM: |
Contact Bell Helicopter Textron Tower 123.350 for Instrns 08:00C-16:30C, Mon-Fri.
|
|---|
| Airframe Repair: |
None
|
|---|
| Powerplant Repair: |
None
|
|---|
|
|
|
| Owner: |
Bell Helicopter Textron
P.O. Box 482
Ft. Worth, Tx 76101
817-280-3418
|
|---|
| Manager: |
D. R. Lang
Bell Hcpters,Po Box 482
Ft Worth, Tx 76101
817-280-3418
|
|---|
|
Runway H1
| Length: |
100 feet
|
|---|
| Width: |
100 feet
|
|---|
| Surface: |
Asphalt / Bituminous Concrete
|
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
