| 0XA1
Heliport
|
Kothmann Ranch
|
|
Fort Mckavett, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | 0XA1 (Zero-Xray-Alpha-One) |
| Lat/Lng: |
30.6788888889, -100.130277778
30-40-44.0000N, 100-07-49.0000W
Estimated by OWNER on 07/01/2010
|
| Elevation: |
2347 feet
Estimated
by OWNER
on 07/01/2010
|
| Magnetic Variation: |
[6E (2013)]
|
| Sectional: |
SAN ANTONIO
|
| From City: |
8nm
S of Fort Mckavett
|
| Use: |
Private
|
| Airspace Analysis: |
CONDITIONAL
Provided VFR Operations and Pvt Use only; Takeoff/Landing Area Marked.
|
| Ownership: |
Privately owned
|
| Activation: |
02/2011
|
| Control Tower: |
no
|
| ARTCC: |
Houston Center
(ZHU)
|
| FSS: |
San Angelo FSS
(SJT)
|
| Wind Indicator: |
Lighted
|
| Landing Fee: |
no
|
|
|
| For year ending: |
06/30/2000
|
| Total: |
0
|
|
| Owner: |
Greer Kothmann
1701 Main St
Junction, Tx 76849
325-446-3013
|
| Manager: |
Greer Kothmann
1701 Main St
Junction, Tx 76849
325-446-3013
|
|
Runway H1
| Length: |
30 feet
by Owner on 07/01/2010
|
| Width: |
30 feet
|
| Surface: |
Porland Cement Concrete
|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.