| 10UT
Heliport
|
Gilbert Development Corp
|
|
Hurricane, Utah
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | 10UT (One-Zero-Uniform-Tango) |
|---|
| Lat/Lng: |
37.1727777778, -113.434444444
37-10-22.0000N, 113-26-04.0000W
Estimated by FAA on 08/26/2009
|
|---|
| Elevation: |
3300 feet
Estimated
by FAA
on 08/26/2009
|
|---|
| Magnetic Variation: |
[12E (2013)]
|
|---|
| Sectional: |
LAS VEGAS
|
|---|
| From City: |
10nm
W of Hurricane
|
|---|
| Use: |
Private
|
|---|
| Ownership: |
Privately owned
|
|---|
| Activation: |
06/2008
|
|---|
| Control Tower: |
no
|
|---|
| ARTCC: |
Los Angeles Center
(ZLA)
|
|---|
| FSS: |
Cedar City FSS
(CDC)
|
|---|
| Wind Indicator: |
Lighted
|
|---|
| Landing Fee: |
no
|
|---|
|
|
|
| Owner: |
Gilbert Development Corp
6249 W. Gilbert Industrial Court
Hurricane, Ut 84737
435-627-1907
|
|---|
| Manager: |
Steve L. Gilbert
6249 W. Gilbert Industrial Court
Hurricane, Ut 84737
435-627-1907
|
|---|
|
Runway H1
| Length: |
100 feet
|
|---|
| Width: |
30 feet
|
|---|
| Surface: |
Asphalt / Bituminous Concrete
|
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
