| 12TS
Airport
|
Blo
|
|
Mineral Wells, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | 12TS (One-Two-Tango-Sierra) |
|---|
| Lat/Lng: | 32.9084575, -97.9772619444
32-54-30.4470N, 097-58-38.1430W
Estimated |
|---|
| Elevation: | 1050 feet Estimated |
|---|
| Magnetic Variation: | 07E,(1986), [3E (2024)] |
|---|
| Sectional: | DALLAS-FT WORTH |
|---|
| From City: | 10nm NE of Mineral Wells |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | NOT ANALYZED |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 04/1986 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Fort Worth(ZFW)Fort Worth Center |
|---|
| FSS: | Fort Worth FSS(FTW) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Landing Fee: | no |
|---|
| Single Engine GA: | 1 |
|---|
| Total: | 1 |
|---|
|
|
| Owner: | David Osborn
1225 Brookside Dr
Hurst, Tx 76053
817-919-7172 |
|---|
| Manager: | David Osborn
1225 Brookside Dr
Hurst, Tx 76053
817-919-7172 |
|---|
|
Runway 17L/35R
| Length: | 1600 feet |
|---|
| Width: | 50 feet |
|---|
| Surface: | Asphalt / Bituminous Concrete |
|---|
| Surface Treatment: | NONE |
|---|
Runway 17R/35L
| Length: | 1600 feet |
|---|
| Width: | 50 feet |
|---|
| Surface: | Asphalt / Bituminous Concrete |
|---|
| Surface Treatment: | NONE |
|---|
| • | A30-17R/35L-Runway 17R/35L Closed Indefinitely. |
|---|
| • | for Cd Contact Fort Worth ARTCC at 817-858-7584. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
