| 15II
Heliport
|
Findlay
|
|
Lafayette, Indiana
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | 15II (One-Five-India-India) |
| Lat/Lng: |
40.3388888889, -86.9408333333
40-20-20.0000N, 086-56-27.0000W
Estimated
|
| Elevation: |
670 feet
Estimated
|
| Magnetic Variation: |
02W,
(1995),
[-4W (2013)]
|
| Sectional: |
CHICAGO
|
| From City: |
4nm
SW of Lafayette
|
| Use: |
Private
|
| Airspace Analysis: |
CONDITIONAL
Provided Approach/Departure Operations from 040 Degs to 255 Degs; Area Marked; Wind Indicator Maintained; Comply with Far Part 91.126 (B)(2).
|
| Ownership: |
Privately owned
|
| Activation: |
02/1998
|
| Control Tower: |
no
|
| ARTCC: |
Chicago Center
(ZAU)
|
| FSS: |
Terre Haute FSS
(HUF)
|
| Wind Indicator: |
Unlighted
|
| Landing Fee: |
no
|
| Helicopter GA: |
1
|
| Total: |
1
|
|
|
| Owner: |
Jeff Findlay
2103 West 550
S. Lafayette, in 47905
317-474-1383
|
| Manager: |
Jeff Findlay
2103 West 550
S. Lafayette, in 47905
317-474-1383
|
|
Runway H1
| Length: |
250 feet
|
| Width: |
300 feet
|
| Surface: |
Grass / Sod, Good Condition
|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.