1MN4
Seaplane Base
|
Wildhurst Pines
|
Excelsior, Minnesota
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
FAA Identifier: | 1MN4 (One-Mike-November-Four) |
---|
Lat/Lng: | 44.9175194444, -93.6082027778 44-55-03.0700N, 093-36-29.5300W Estimated by State on 03/19/2017 |
---|
Elevation: | 928 feet Surveyed by State on 03/19/2017 |
---|
Magnetic Variation: | [0W (2024)] |
---|
Sectional: | TWIN CITIES |
---|
From City: | 2nm NW of Excelsior |
---|
Use: | Private |
---|
Ownership: | Privately owned |
---|
Activation: | 03/2017 |
---|
Control Tower: | no |
---|
ARTCC: | Minneapolis(ZMP)Minneapolis Center |
---|
FSS: | Princeton FSS(PNM) |
---|
Wind Indicator: | Lighted |
---|
Landing Fee: | no |
---|
|
|
Owner: | Michael Smith 140 Wildhurst Road Tonka Bay, Mn 55331 612-636-8936 |
---|
Manager: | Michael Smith 140 Wildhurst Road Tonka Bay, Mn 55331 612-636-8936 |
---|
|
Runway W/E
Length: | 4600 feet by State on 03/19/2017 |
---|
Width: | 200 feet |
---|
Surface: | Water |
---|
Surface Treatment: | NONE |
---|
• | for Cd Contact Minneapolis ARTCC at 651-463-5588. |
---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.