| 1TX2
Airport
|
J Y Ranch-R B Masterson III Estate
|
|
Guthrie, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | 1TX2 (One-Tango-Xray-Two) |
|---|
| Lat/Lng: | 33.7167516667, -100.150382222
33-43-00.3060N, 100-09-01.3760W
Estimated |
|---|
| Elevation: | 1808 feet Estimated |
|---|
| Magnetic Variation: | 08E,(1985), [5E (2024)] |
|---|
| Sectional: | DALLAS-FT WORTH |
|---|
| From City: | 10nm NE of Guthrie |
|---|
| Use: | Private |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 06/1958 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Fort Worth(ZFW)Fort Worth Center |
|---|
| FSS: | Fort Worth FSS(FTW) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Landing Fee: | no |
|---|
| Fuel: | Grade 100 Gasoline (green) |
|---|
| Airframe Repair: | None |
|---|
| Powerplant Repair: | None |
|---|
| Single Engine GA: | 1 |
|---|
| Total: | 1 |
|---|
|
|
| Owner: | R.B. Masterson, III
Box 13
Guthrie, Tx 79236
806-596-4450 |
|---|
|
Runway 05/23
| Length: | 2600 feet |
|---|
| Width: | 50 feet |
|---|
| Surface: | Grass / Sod |
|---|
| Surface Treatment: | NONE |
|---|
|
End 05 |
End 23 |
|---|
| Objects: | Brush | Brush |
|---|
Runway 13/31
| Length: | 1600 feet |
|---|
| Width: | 50 feet |
|---|
| Surface: | Grass / Sod |
|---|
| Surface Treatment: | NONE |
|---|
|
End 13 |
End 31 |
|---|
| Objects: | Brush | Brush |
|---|
| • | for Cd Contact Fort Worth ARTCC at 817-858-7584. |
|---|
| • | (Airport Status) Airport Closed Indefinitely. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
