2ND2
Airport
 Makeeff
Mercer, North Dakota

FAA NFDC Information Effective 56-day cycle 03/21/2024 - 5/16/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:2ND2
Lat/Lng:47.5669433333, -100.721247778
47-34-00.9960N, 100-43-16.4920W
Estimated
Elevation:1910 feet Estimated
Magnetic Variation:10E,(1985), [5E (2024)]
Sectional:TWIN CITIES
From City:4nm N of Mercer

Operations

Use:Private
Airspace Analysis:CONDITIONAL
Obstns in Runway Approach Slope Surface be Removed/Lowered or Runway Threshold Displaced and Marked to Provide Min 20:1 Approach Clearance and Area 125' Either Side Runway Centerline Clrd of Any Obstns.
Ownership:Privately owned
Attended:Owner Lives Beside Strip.
Control Tower:no
ARTCC:Minneapolis(ZMP)Minneapolis Center
FSS:Grand Forks FSS(GFK)
Wind Indicator:Unlighted
Landing Fee:no

Communications

Services

Based Aircraft

Single Engine GA:1
Total:1

Annual Operations

Total:0

Ownership

Owner:Russell Makeeff
Mercer, Nd 58559
701-447-2467

Runways

Runways:E/W

Runway E/W

Length:2600 feet
Width:70 feet
Surface:Grass / Sod
Surface Treatment:NONE
End E End W

Procedures

NOTAMs

Additional Remarks

•for Cd Contact Minneapolis ARTCC at 651-463-5588.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.