2XA4
Airport
Flying S Ranch
Collinsville, Texas

FAA NFDC Information Effective 56-day cycle 07/24/2014 - 9/18/2014

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:2XA4
Lat/Lng: 33.5808333333, -96.8002777778
33-34-51.0000N, 096-48-01.0000W
Estimated by OWNER on 09/25/2006
Elevation: 730 feet Estimated by OWNER on 09/25/2006
Magnetic Variation: [4E (2014)]
Sectional: DALLAS-FT WORTH
From City: 9nm NE of Collinsville

Operations

Use: Private
Airspace Analysis: CONDITIONAL
Provided Clear 20:1 Approaches, Submit Separate Application If IFR Procedures are Anticipated; and Recommend Orange Balls on Powerline.
Ownership: Privately owned
Activation: 09/2006
Control Tower: no
ARTCC: Fort Worth Center (ZFW)
FSS: Fort Worth FSS (FTW)
Wind Indicator: Lighted
Landing Fee: no

Communications

Services

Based Aircraft

Single Engine GA: 1
Total: 1

Annual Operations

Total: 0

Ownership

Owner: Daryl G. Smith
700 Nettleton Drive
Southlake, Tx 76092
817-251-8694
Manager: Daryl G. Smith
700 Nettleton Drive
Southlake, Tx 76092
817-251-8694

Runways

Runways: 18/36

Runway 18/36

Length: 2500 feet
by Owner on 09/25/2006
Width: 40 feet
Surface: Grass / Sod
End 18 End 36
Objects: Fence Powerline
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach
Object Height: 4' AGL 30' AGL
Object Distance: 20' Along centerline 100' Along centerline

Procedures

NOTAMs

Additional Remarks

2000 Ft Tower 3.12 NM SW.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.