| 34ND
Airport
|
Plath Farms
|
|
Davenport, North Dakota
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | 34ND |
|---|
| Lat/Lng: | 46.7058036111, -97.1564788889
46-42-20.8930N, 097-09-23.3240W
Estimated |
|---|
| Elevation: | 928 feet Estimated |
|---|
| Magnetic Variation: | 06E,(1985), [3E (2024)] |
|---|
| Sectional: | TWIN CITIES |
|---|
| From City: | 3nm W of Davenport |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | CONDITIONAL
Provided There is a Letter of Agreement Between Plath Farms, Hans Strip and Schroeder Airports. |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 02/1981 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Minneapolis(ZMP)Minneapolis Center |
|---|
| FSS: | Grand Forks FSS(GFK) |
|---|
| Wind Indicator: | None |
|---|
| Landing Fee: | no |
|---|
| Single Engine GA: | 1 |
|---|
| Total: | 1 |
|---|
|
|
| Owner: | James Plath
4875- 158Th Avenue SE
Davenport, Nd 58021
701-645-2244 |
|---|
| Manager: | James Plath
4875- 158Th Avenue SE
Davenport, Nd 58021
701-645-2244 |
|---|
|
Runway 18/36
| Length: | 2600 feet
by Arpts Contractor on 06/18/2008 |
|---|
| Width: | 60 feet |
|---|
| Surface: | Grass / Sod |
|---|
| Surface Treatment: | NONE |
|---|
|
End 18 |
End 36 |
|---|
| Right Hand Pattern: | Yes | |
|---|
| • | for Cd Contact Minneapolis ARTCC at 651-463-5588. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
