34TE
Airport
Bee Creek
Maypearl, Texas

FAA NFDC Information Effective 56-day cycle 07/24/2014 - 9/18/2014

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:34TE
Lat/Lng: 32.2320916667, -97.0086122222
32-13-55.5300N, 097-00-31.0040W
Estimated
Elevation: 760 feet Estimated
Magnetic Variation: 06E, (1985), [4E (2014)]
Sectional: DALLAS-FT WORTH
From City: 5nm S of Maypearl

Operations

Use: Private
Ownership: Privately owned
Activation: 03/1970
Control Tower: no
ARTCC: Fort Worth Center (ZFW)
FSS: Fort Worth FSS (FTW)
Wind Indicator: Unlighted
Landing Fee: no

Communications

Services

Airframe Repair: None
Powerplant Repair: None
Transient Storage: Tie-Down

Based Aircraft

Single Engine GA: 1
Total: 1

Annual Operations

For year ending: 12/03/1990
Local GA (< 20 miles): 25
Non-local GA: 25
Total: 50

Ownership

Owner: M. L. Tanner
Rt 2, Box 127
Grandview, Tx 76050
214-435-4764
Manager: M. L. Tanner
Rt 2, Box 127
Grandview, Tx 76050
214-435-4764

Runways

Runways: 17/35

Runway 17/35

Length: 3030 feet
Width: 40 feet
Surface: Grass / Sod, Poor Condition
End 17 End 35
Objects: Fence Powerline
Object Marking:   Marked
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach
Object Clearance Slope: 0:1 1:1
Object Height: 4' AGL 18' AGL
Object Distance: 0' Along centerline
20' Left of centerline
35' Along centerline
0B'

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.