| 38NY
Airport
|
Greenlawn Farm
|
|
Dundee, New York
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | 38NY |
|---|
| Lat/Lng: | 42.5486819444, -76.9580188889
42-32-55.2550N, 076-57-28.8680W
Estimated |
|---|
| Elevation: | 1010 feet Estimated |
|---|
| Magnetic Variation: | 11W,(1985), [-12W (2024)] |
|---|
| Sectional: | NEW YORK |
|---|
| From City: | 2nm NE of Dundee |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | CONDITIONAL
VFR Use only. |
|---|
| Ownership: | Privately owned |
|---|
| Attended: | All year Every day Daylight hours |
|---|
| Control Tower: | no |
|---|
| ARTCC: | New York(ZNY)Cleveland Center(ZOB) |
|---|
| FSS: | Buffalo FSS(BUF) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Lights: | for LIRL Runway NE/SW Call 607-243-5586. |
|---|
| Beacon: | for Rotating Beacon Call 607-243-5586. |
|---|
| Landing Fee: | no |
|---|
| Airframe Repair: | None |
|---|
| Powerplant Repair: | None |
|---|
| Single Engine GA: | 2 |
|---|
| Total: | 2 |
|---|
|
|
| Owner: | Philip W Rider
Rd 1
Dundee, Ny 14837
607-243-5586 |
|---|
| Manager: | Philip W Rider
Rd 1
Dundee, Ny 14837
607-243-5586 |
|---|
|
Runway NE/SW
| Length: | 1950 feet |
|---|
| Width: | 50 feet |
|---|
| Surface: | Grass / Sod |
|---|
| Surface Treatment: | NONE |
|---|
| Runway Lights Edge Intensity: | Low Intensity |
|---|
| • | for Cd Contact Elmyra Approach at 607-739-1971, When Approach Closed Contact Cleveland ARTCC at 440-774-0231. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
