| 3AR5
Airport
|
Tripp Strip
|
|
Griffithville, Arkansas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | 3AR5 |
|---|
| Lat/Lng: | 35.1178638889, -91.6118833333
35-07-04.3100N, 091-36-42.7800W
Estimated |
|---|
| Elevation: | 210 feet Estimated |
|---|
| Magnetic Variation: | 02E,(2000), [-1W (2024)] |
|---|
| Sectional: | MEMPHIS |
|---|
| From City: | 1nm E of Griffithville |
|---|
| Use: | Private |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 11/2000 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Memphis(ZME)Memphis Center |
|---|
| FSS: | Jonesboro FSS(JBR) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Landing Fee: | no |
|---|
| Single Engine GA: | 2 |
|---|
| Total: | 2 |
|---|
|
|
| Owner: | Billy Wayne Tripp
Po Box 60
Griffithville, Ar 72060
501-323-4390 |
|---|
| Manager: | Jerry Fischer
Po Box 59
Griffithville, Ar 72060
501-323-4390 |
|---|
|
Runway 18/36
| Length: | 2640 feet |
|---|
| Width: | 60 feet |
|---|
| Surface: | Grass / Sod |
|---|
| Surface Treatment: | NONE |
|---|
|
End 18 |
End 36 |
|---|
| Objects: | Powerline | |
|---|
| Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
|---|
| Object Height: | 35' AGL | |
|---|
| Object Distance: | 60' Along centerline | |
|---|
| • | A30-18/36-Land North. |
|---|
| • | for Cd Contact Little Rock Approach 501-379-2908 or Little Rock Air Traffic Control Tower 501-379-2911. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
