3NK2
Heliport
Bassett
Cooperstown, New York

FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:3NK2
Lat/Lng:42.689175, -74.9213916667
42-41-21.0300N, 074-55-17.0100W
Estimated by Faa-Est Imagery on 05/28/2015
Elevation:1243 feet Estimated
Magnetic Variation:13W,(2000), [-13W (2024)]
Sectional:NEW YORK
From City:1nm SE of Cooperstown

Operations

Use:Private
Medical Use.
Airspace Analysis:CONDITIONAL
Provided Overflight of Schools & Other Areas of Public Assembly be Avoided, Recommend Coordination with Cooperstown Airport on Approaches & Departures, Appropriate Mkgs for Ingress/Egress on Pad, Install Lgtd Windsock, Vehicular Traffic Around Site Controlled During Operations, No IFR Flight Plans.
Ownership:Privately owned
Activation:02/1999
Control Tower:no
ARTCC:Boston(ZBW)Boston Center
FSS:Buffalo FSS(BUF)
Wind Indicator:Lighted
Lights:Activate Perimeter Lights - 122.8.
Landing Fee:no

Communications

UNICOM:122.800

Services

Based Aircraft

Total:0

Annual Operations

Total:0

Ownership

Owner:Clark Foundation
Po Box 510, 19 Main St
Cooperstown, Ny 13326
607-547-2561
Manager:Jonathan Flyte
1 Atwell Road
Cooperstown, Ny 13326
607-547-6700

Runways

Runways:H1

Runway H1

Length:80 feet
Width:80 feet
Surface:Porland Cement Concrete, Good Condition
Surface Treatment:NONE
Runway Lights Edge Intensity:Perimeter

Procedures

NOTAMs

Additional Remarks

for Cd Contact Syracuse Approach at 315-455-6218.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.