3PA3
Heliport
Dr2
Schnecksville, Pennsylvania

FAA NFDC Information Effective 56-day cycle 03/21/2024 - 5/16/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:3PA3
Lat/Lng:40.68, -75.6366666667
40-40-48.0000N, 075-38-12.0000W
Estimated by Owner on 09/12/2022
Elevation:656 feet Estimated by Owner on 09/12/2022
Magnetic Variation: [-12W (2024)]
Sectional:NEW YORK
From City:1nm W of Schnecksville

Operations

Use:Private
Airspace Analysis:Day VFR Operations only.
Ownership:Privately owned
Activation:09/2022
Control Tower:no
ARTCC:New York(ZNY)New York Center
FSS:Williamsport FSS(IPT)
Wind Indicator:Lighted
Landing Fee:no

Communications

CTAF:122.900

Services

Based Aircraft

Total:0

Annual Operations

Total:0

Ownership

Owner:Michael Selig
2816 Orefield Rd
Allentown, Pa 18104
610-360-3953
Manager:Michael Selig
2816 Orefield Rd
Allentown, Pa 18104
610-360-3953

Runways

Runways:H1

Runway H1

Length:60 feet
by Owner on 09/12/2022
Width:60 feet
Surface:Grass / Sod, Natural Soil
Surface Treatment:NONE

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.