3TX1
Airport
Paradise Point
Berryville, Texas

FAA NFDC Information Effective 56-day cycle 11/13/2014 - 1/8/2015

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:3TX1 (Three-Tango-Xray-One)
Lat/Lng: 32.0916666667, -95.4447222222
32-05-30.0000N, 095-26-41.0000W
Estimated
Elevation: 345 feet Estimated
Magnetic Variation: 05E, (1995), [3E (2014)]
Sectional: DALLAS-FT WORTH
From City: 1nm E of Berryville

Operations

Use: Private
Ownership: Privately owned
Activation: 02/1999
Control Tower: no
ARTCC: Fort Worth Center (ZFW)
FSS: Fort Worth FSS (FTW)
Pattern Altitude: 1050 MSL (705 AGL)
Wind Indicator: Unlighted
Segmented Circle: yes
Landing Fee: no

Communications

Services

Based Aircraft

Single Engine GA: 4
Multi Engine GA: 1
Helicopter GA: 1
Ultralights: 2
Total: 8

Annual Operations

Total: 0

Ownership

Owner: Lonny & Roxann Menard
121 Chandelle
Frankston, Tx 75763
903-876-3370
Manager: Lonny & Roxann Menard
121 Chandelle
Frankston, Tx 75763
903-876-3370

Runways

Runways: 09/27

Runway 09/27

Length: 1900 feet
Width: 30 feet
Surface: Grass / Sod
End 09 End 27
Right Hand Pattern:   Yes
All Aircraft Remain Northof Runway 27.
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach

Procedures

NOTAMs

Additional Remarks

All Aircraft Monitor Frequency 122.9 Due to Proximity to Aero Estates Airport.
Departing Aircraft Shall be Established on North Bound Heading Before Proceeding on Course.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.