| 3XA0
Airport
|
Drennan
|
|
Grandview, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | 3XA0 (Three-Xray-Alpha-Zero) |
|---|
| Lat/Lng: | 32.3138888889, -97.2311111111
32-18-50.0000N, 097-13-52.0000W
Estimated by Owner on 01/24/2007 |
|---|
| Elevation: | 726 feet Estimated by Owner on 01/24/2007 |
|---|
| Magnetic Variation: | [3E (2024)] |
|---|
| Sectional: | DALLAS-FT WORTH |
|---|
| From City: | 6nm NW of Grandview |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | CONDITIONAL
Provided Right Trafffic Runway 17, Left Traffic Runway 35, and Letter of Agreement with the 3 Arpts Nearby. |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 05/2005 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Fort Worth(ZFW)Fort Worth Center |
|---|
| FSS: | Fort Worth FSS(FTW) |
|---|
| Wind Indicator: | Lighted |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | John Drennan
8356 Cr 308
Grandview, Tx 76050
817-558-1071 |
|---|
| Manager: | John Drennan
8356 Cr 308
Grandview, Tx 76050
817-706-3846 |
|---|
|
Runway 17/35
| Length: | 2000 feet
by Owner on 01/24/2007 |
|---|
| Width: | 20 feet |
|---|
| Surface: | Asphalt / Bituminous Concrete |
|---|
| Surface Treatment: | NONE |
|---|
|
End 17 |
End 35 |
|---|
| Right Hand Pattern: | Yes | |
|---|
| Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
|---|
| • | for Cd Contact Regional Approach at 972-615-2799. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
