40NR
Heliport
Steele Creek
Charlotte, North Carolina

FAA NFDC Information Effective 56-day cycle 04/03/2014 - 5/29/2014

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:40NR (Four-Zero-November-Romeo)
Lat/Lng: 35.0983333333, -80.9933333333
35-05-54.0000N, 080-59-36.0000W
Estimated by OWNER on 05/12/2010
Elevation: 613 feet Estimated by OWNER on 05/12/2010
Magnetic Variation: [-7W (2014)]
Sectional: CHARLOTTE
From City: in Charlotte

Operations

Use: Private
Airspace Analysis: CONDITIONAL
Provided VFR Operations and Pvt Use only; Takeoff/Landing Area Marked; All Approach/Departures Arrival and Depart out of Ground Effect Using Confined Area Maneuvers, Using Lead in Lights; No Over Fly of Buildings During Hops Unless Nec for Wind Conds.
Ownership: Privately owned
Activation: 03/2011
Attended: Continuous
Control Tower: no
ARTCC: Atlanta (ZTL) Atlanta Center (ZTL)
FSS: Raleigh FSS (RDU)
Wind Indicator: Unlighted
Lights: for Peri Lights Call 704-512-5500.
Landing Fee: no

Communications

Services

Based Aircraft

Total: 0

Annual Operations

For year ending: 04/30/2009
Total: 0

Ownership

Owner: Cmc - Steel Creek
13640 Steele Croft Parkway
Charlotte, Nc 28273
704-512-7941
Manager: Jason Schwebach
Po Box 32861
Charlotte, Nc 28203
704-512-7941

Runways

Runways: H1

Runway H1

Length: 60 feet
by Owner on 05/12/2010
Width: 60 feet
Surface: Porland Cement Concrete, Good Condition
Runway Lights Edge Intensity: Perimeter

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.