| 4PA4
Heliport
|
Upmc Susquehanna Lock Haven
|
|
Lock Haven, Pennsylvania
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | 4PA4 |
|---|
| Lat/Lng: | 41.1319444444, -77.4708333333
41-07-55.0000N, 077-28-15.0000W
Estimated by Owner on 01/19/2012 |
|---|
| Elevation: | 720 feet Estimated by State on 08/28/2017 |
|---|
| Magnetic Variation: | 11W,(2000), [-11W (2024)] |
|---|
| Sectional: | DETROIT |
|---|
| From City: | in Lock Haven |
|---|
| Use: | Private |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 04/1973 |
|---|
| Attended: | Continuous |
|---|
| Control Tower: | no |
|---|
| ARTCC: | New York(ZNY)New York Center |
|---|
| FSS: | Williamsport FSS(IPT) |
|---|
| NOTAMs and Weather: | FDC |
|---|
| Wind Indicator: | Unlighted |
|---|
| Landing Fee: | no |
|---|
| Airframe Repair: | None |
|---|
| Powerplant Repair: | None |
|---|
|
|
|
| Owner: | Upmc Lock Haven
24 Cree Drive
Lock Haven, Pa 17745
(570) 321-1000 |
|---|
| Manager: | Terry Austin
700 High Street
Williamsport, Pa 17701
(570) 321-2222 |
|---|
|
Runway H1
| Length: | 70 feet
by State on 08/25/2017 |
|---|
| Width: | 70 feet |
|---|
| Surface: | Asphalt / Bituminous Concrete, Excellent Condition |
|---|
| Surface Treatment: | NONE |
|---|
| Remarks: | Ingress/Egress 110/280, 270/090. |
|---|
| • | for Cd Contact New York ARTCC at 631-468-1425. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
