| 56AZ
Airport
|
Mauldin Airstrip
|
|
Tonopah, Arizona
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | 56AZ |
|---|
| Lat/Lng: |
33.4819833333, -113.0021275
33-28-55.1400N, 113-00-07.6590W
Estimated
|
|---|
| Elevation: |
1193 feet
Estimated
|
|---|
| Magnetic Variation: |
13E,
(1985),
[11E (2013)]
|
|---|
| Sectional: |
PHOENIX
|
|---|
| From City: |
3nm
SW of Tonopah
Airport Located 19 NM W Buckeye.
|
|---|
| Use: |
Private
|
|---|
| Airspace Analysis: |
CONDITIONAL
Private Use.
|
|---|
| Ownership: |
Privately owned
|
|---|
| Activation: |
03/1974
|
|---|
| Control Tower: |
no
|
|---|
| ARTCC: |
Albuquerque Center
(ZAB)
|
|---|
| FSS: |
Prescott FSS
(PRC)
|
|---|
| Wind Indicator: |
Unlighted
|
|---|
| Landing Fee: |
no
|
|---|
| Airframe Repair: |
None
|
|---|
| Powerplant Repair: |
None
|
|---|
| Multi Engine GA: |
1
|
|---|
| Total: |
1
|
|---|
|
|
| Owner: |
William H Mauldin
1013 West Elliott Place
Santa Ana, Ca 92704
714-545-1001
|
|---|
|
Runway 11/29
| Length: |
2900 feet
|
|---|
| Width: |
60 feet
|
|---|
| Surface: |
Gravel / Cinders / Crushed Rock / Coral/Shells / Slag
|
|---|
|
End 11 |
End 29 |
|---|
| Objects: |
Fence
|
Fence
|
|---|
| Objects affecting Navigable Airspace (CFR part 77): |
Utility runway with a visual approach
|
Utility runway with a visual approach
|
|---|
| Object Height: |
4' AGL
|
4' AGL
|
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
