Heineck Farm
Everett, Washington

FAA NFDC Information Effective 56-day cycle 09/14/2017 - 11/9/2017

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks


FAA Identifier:76WA
Lat/Lng: 48.0050966667, -122.133744722
48-00-18.3480N, 122-08-01.4810W
Elevation: 10 feet Estimated
Magnetic Variation: 21E, (1985), [16E (2017)]
Sectional: SEATTLE
From City: 3nm NE of Everett


Use: Private
Ownership: Privately owned
Activation: 11/1978
Control Tower: no
ARTCC: Seattle Center (ZSE)
FSS: Seattle FSS (SEA)
Wind Indicator: None
Landing Fee: no



Based Aircraft

Single Engine GA: 2
Total: 2

Annual Operations

Total: 0


Owner: Joseph B Heineck
930 Sunnyside Blvd
Everett, Wa 98205
Manager: Joseph B Heineck
930 Sunnyside Blvd
Everett, Wa 98205


Runways: 07/25

Runway 07/25

Length: 2500 feet
Width: 75 feet
Surface: Grass / Sod
End 07 End 25
Objects: Berm
300' Hill at 2000'
Object Height:   60' AGL
Object Distance: 200' Along centerline 100' Along centerline



Additional Remarks

Runway 07/25 Strip Soft When Wet.
(A30) Advise Landing Traffic Use Runway 7; Departing Traffic Use Runway 25

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.