Geisinger Rooftop
Danville, Pennsylvania

FAA NFDC Information Effective 56-day cycle 06/22/2017 - 8/17/2017

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks


FAA Identifier:79PN
Lat/Lng: 40.967891, -76.605721
40-58-04.4076N, 076-36-20.5956W
Estimated by FAA-EST IMAGERY on 08/31/2012
Elevation: 673 feet Estimated by FAA-EST IMAGERY on 06/26/2012
Magnetic Variation: 12W, (2005), [-12W (2017)]
Sectional: NEW YORK
From City: in Danville


Use: Private
Ownership: Privately owned
Activation: 02/1982
Attended: Continuous
Control Tower: no
ARTCC: New York Center (ZNY)
FSS: Williamsport FSS (IPT)
NOTAMs and Weather: FDC
Wind Indicator: Lighted
Landing Fee: no


UNICOM: 123.050
Weather: AWOS-3 570-271-8192 118.075


Based Aircraft

Total: 0

Annual Operations

Total: 0


Owner: Geisinger Medical Center
100 North Academy Drive
Danville, Pa 17822
Manager: Richard Smith
Geisinger Medical Center, 100 North Academy Drive
Danville, Pa 17822-2005


Runways: H1

Runway H1

Length: 60 feet
Width: 50 feet
Surface: Roof, Top
Aluminum Surface, Rooftop Facility.



Additional Remarks

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.