Tilghman Whipp
Tilghman, Maryland

FAA NFDC Information Effective 56-day cycle 09/14/2017 - 11/9/2017

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks


FAA Identifier:7MD9
Lat/Lng: 38.7361111111, -76.3166666667
38-44-10.0000N, 076-19-00.0000W
Elevation: 5 feet Estimated
Magnetic Variation: 11W, (1995), [-11W (2017)]
From City: 1nm S of Tilghman


Use: Private
Airspace Analysis: CONDITIONAL
Daytime VFR only; Maintain Clear 20:1 to Each Runway End; Operate in Noise Sensitive Manner.
Ownership: Privately owned
Activation: 02/1998
Control Tower: no
ARTCC: Washington Center (ZDC)
FSS: Leesburg FSS (DCA)
Wind Indicator: Unlighted
Landing Fee: no



Based Aircraft

Total: 0

Annual Operations

Total: 0


Owner: Gary Dunn
22020 Benders Lane
Sherwood, Md 21665
Manager: Gary Dunn
22020 Benders Lane
Sherwood, Md 21665


Runways: 03/21

Runway 03/21

Length: 1920 feet
Width: 86 feet
Surface: Grass / Sod, Fair Condition
End 03 End 21
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach



Additional Remarks

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.