7PA3
Airport
Charles G. Kalko
Honesdale, Pennsylvania

FAA NFDC Information Effective 56-day cycle 04/03/2014 - 5/29/2014

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:7PA3
Lat/Lng: 41.7056430556, -75.2879538889
41-42-20.3150N, 075-17-16.6340W
Estimated
Elevation: 1400 feet Estimated
Magnetic Variation: 12W, (1985), [-13W (2014)]
Sectional: NEW YORK
From City: 10nm N of Honesdale

Operations

Use: Private
Airspace Analysis: CONDITIONAL
Provided Largest Class of Aircraft Recommended for Operations is 12500 Lbs or Less & the Airport is Consistent with FAA Design Standards.
Ownership: Privately owned
Activation: 06/1991
Attended: Continuous
Control Tower: no
ARTCC: New York Center (ZNY)
FSS: Williamsport FSS (IPT)
Wind Indicator: Unlighted
Lights: Activate LIRL Runway 18/36 - 129.900.
Landing Fee: no

Communications

Services

Fuel: Grade 100LL Gasoline (low lead blue)

Based Aircraft

Single Engine GA: 3
Gliders: 2
Total: 5

Annual Operations

Total: 0

Ownership

Owner: Mrs. Marti Kalko
1126 Upper Woods Road
Honesdale, Pa 18431
908-385-7948
Manager: Mrs. Marti Kalko
1126 Upper Woods Road
Honesdale, Pa 18431
908-385-7948

Runways

Runways: 18/36

Runway 18/36

Length: 4000 feet
Width: 50 feet
Surface: Asphalt / Bituminous Concrete
Runway Lights Edge Intensity: Low Intensity
End 18 End 36
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.