7PN0
Airport
Tidmore
Minersville, Pennsylvania

FAA NFDC Information Effective 56-day cycle 11/13/2014 - 1/8/2015

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:7PN0 (Seven-Papa-November-Zero)
Lat/Lng: 40.705, -76.2363888889
40-42-18.0000N, 076-14-11.0000W
Estimated
Elevation: 930 feet Estimated
Magnetic Variation: 11W, (1985), [-12W (2014)]
Sectional: NEW YORK
From City: 1nm NE of Minersville

Operations

Use: Private
Airspace Analysis: NOT ANALYZED
Built Before 1959
Ownership: Privately owned
Activation: 03/1961
Control Tower: no
ARTCC: New York Center (ZNY)
FSS: Williamsport FSS (IPT)
Pattern Altitude: 1730 MSL (800 AGL)
Wind Indicator: Unlighted
Landing Fee: no

Communications

Services

Bottled Oxygen: None
Bulk Oxygen: None
Transient Storage: Tie-Down

Based Aircraft

Single Engine GA: 1
Total: 1

Annual Operations

Total: 0

Ownership

Owner: Argie D. Tidmore
Po Box 86
Pottsville, Pa 17901
570-622-1360
Ext. 26
Manager: Argie D. Tidmore
Po Box 86
Pottsville, Pa 17901
570-622-1360
Ext. 26

Runways

Runways: 08/26

Runway 08/26

Length: 2000 feet
Width: 150 feet
Surface: Grass / Sod, Good Condition
End 08 End 26
Runway Markings: 08/26 Outlined with Yellow Tires.  
Objects: Tree Trees
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach
Object Height: 33' AGL 18' AGL
Object Distance: 492' Along centerline 271' Along centerline

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.