7T7
Airport
Skywest Inc
Midland, Texas

FAA NFDC Information Effective 56-day cycle 03/21/2024 - 5/16/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:7T7
Lat/Lng:31.8550833333, -102.073944444
31-51-18.3000N, 102-04-26.2000W
Estimated by Faa-Est on 04/02/2012
Elevation:2805 feet Estimated
Magnetic Variation:09E,(1985), [6E (2024)]
Sectional:SAN ANTONIO
From City:9nm S of Midland

Operations

Use:Open to the public
Ownership:Privately owned
Activation:02/1976
Attended:All year Every day DAWN-DUSK (local)
Control Tower:no
ARTCC:Fort Worth(ZFW)Fort Worth Center
FSS:San Angelo FSS(SJT)
NOTAMs and Weather:SJTNOTAM-D service at airport
Wind Indicator:Unlighted
Segmented Circle:yes
Lights:Sunset-Sunrise
Landing Fee:no

Communications

CTAF:122.900

Services

Fuel:Grade 100LL Gasoline (low lead blue)
Automotive Gasoline
L Fuel is Self Serve.
Airframe Repair:Minor
Powerplant Repair:Major
Transient Storage:Hanger,Tie-Down
Other Services:Pilot Instruction, Aircraft Sales

Based Aircraft

Single Engine GA:30
Multi Engine GA:2
Helicopter GA:2
Total:34

Annual Operations

For year ending:05/22/2021
Local GA (< 20 miles):6400
Non-local GA:3200
Total:9600

Ownership

Owner:Skywest Airport Inc
10000 S Cr 1210
Midland, Tx 79706
432-570-5983
Manager:Aaron Kinsey
10306 S Cr 1210
Midland, Tx 79706
(432) 682-5055

Runways

Runways:06/24
16/34

Runway 06/24

Length:2800 feet
Width:45 feet
Surface:Asphalt / Bituminous Concrete, Fair Condition
Surface Treatment:NONE
End 06 End 24
True Alignment:075,(069 Magnetic)255,(249 Magnetic)
Runway Markings:Nonstandard (Other Than Numbers Only),Markings Non-Standard Due to Incor Size.Nonstandard (Other Than Numbers Only),Markings Non-Standard Due to Incor Size.
Elevation at End:2803.0' MSL2805.0' MSL
Objects:BrushBrush
Objects affecting Navigable Airspace (CFR part 77):Utility runway with a visual approachUtility runway with a visual approach
Object Clearance Slope:0:10:1
Object Height:5' AGL6' AGL
Object Distance:201' Along centerline
0B'
201' Along centerline
0B'
Other Objects:5 ft Fence, 0-199 ft Dstc, 70 ft L/R4 ft Fence 0 ft Dstc.

Runway 16/34

Length:5000 feet
Width:42 feet
Surface:Asphalt / Bituminous Concrete, Fair Condition
Surface Treatment:NONE
Weight Capacity:Single Wheel aircraft: 12,000 lbs
Runway Lights Edge Intensity:Non-standard Lighting System
Non-Standard Solar Lights, 4 Clear Lights Each End.
End 16 End 34
True Alignment:165,(159 Magnetic)345,(339 Magnetic)
Runway Markings:Nonstandard (Other Than Numbers Only),Markings Non-Standard Due to Incor Size. Edge Reflectors Entr Len.Nonstandard (Other Than Numbers Only),Markings Non-Standard Due to Incor Size. Edge Reflectors Entr Len.
Elevation at End:2782.0' MSL2805.0' MSL
Objects:BrushBrush
Objects affecting Navigable Airspace (CFR part 77):Utility runway with a visual approachUtility runway with a visual approach
Object Clearance Slope:0:10:1
Object Height:6' AGL6' AGL
Object Distance:201' Along centerline
0B'
200' Along centerline
0B'
Other Objects:7 ft Fence 132 ft Dstc, 0 ft B.+4 ft Fence 170 ft Dstc, 0 ft Both .

Procedures

NOTAMs

Additional Remarks

Deer on & in Vicinity of Airport.
for Cd Contact Midland Approach at 432-563-2123. When Approach Closed Contact Fort Worth ARTCC at 817-858-7584.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.