| 7TS3
Airport
|
Sunny V Ranch
|
|
Sisterdale, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | 7TS3 |
|---|
| Lat/Lng: | 29.9323694444, -98.6771166667
29-55-56.5300N, 098-40-37.6200W
Estimated by Owner on 10/13/2016 |
|---|
| Elevation: | 1231 feet Estimated by Owner on 10/13/2016 |
|---|
| Magnetic Variation: | [4E (2024)] |
|---|
| Sectional: | SAN ANTONIO |
|---|
| From City: | 4nm SE of Sisterdale |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | CONDITIONAL |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 11/2016 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Houston(ZHU)Houston Center |
|---|
| FSS: | Fort Worth FSS(FTW) |
|---|
| Wind Indicator: | Lighted |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | Patrick Vandervilt
208 Costa Bella Drive
Austin, Tx 78734
512-431-6895
Pattern@Vanderwilt.US |
|---|
| Manager: | Patrick Vanderwilt
208 Costa Bella Drive
Austin, Tx 78734
512-431-6895 |
|---|
|
Runway 09/27
| Length: | 1400 feet
by Owner on 10/13/2016 |
|---|
| Width: | 60 feet |
|---|
| Surface: | Grass / Sod, Good Condition |
|---|
| Surface Treatment: | NONE |
|---|
|
End 09 |
End 27 |
|---|
| True Alignment: | 092,(088 Magnetic) | 272,(268 Magnetic) |
|---|
| Elevation at End: | 1227.0' MSL | 1228.0' MSL |
|---|
| Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
|---|
| • | for Cd Contact Houston ARTCC at 281-230-5622. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
