Elk Meadows Ranch
Townsend, Montana

FAA NFDC Information Effective 56-day cycle 09/14/2017 - 11/9/2017

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks


FAA Identifier:8MT4
Lat/Lng: 46.5358333333, -111.498888889
46-32-09.0000N, 111-29-56.0000W
Estimated by OWNER on 11/13/2009
Elevation: 4066 feet Estimated by OWNER on 11/13/2009
Magnetic Variation: [12E (2017)]
Sectional: GREAT FALLS
From City: 8nm N of Townsend


Use: Private
Airspace Analysis: CONDITIONAL
Provided VFR Operations and Pvt Use only.
Ownership: Privately owned
Activation: 03/2010
Attended: Continuous
Control Tower: no
ARTCC: Salt Lake City (ZLC) Salt Lake City Center (ZLC)
FSS: Great Falls FSS (GTF)
Wind Indicator: Unlighted
Landing Fee: no



Based Aircraft

Single Engine GA: 1
Total: 1

Annual Operations

For year ending: 09/10/2009
Total: 0


Owner: William Waldron & Esther Suhr
2584 Hwy 284
Townsend, Mt 59644
Manager: Bill Waldron
Esther Suhr 406-980-1687 Esuhr@Mt.Net
2584 Hwy 284
Townsend, Mt 59644
(406) 980-1633


Runways: 05/23

Runway 05/23

Length: 2200 feet
by Owner on 11/13/2009
Width: 50 feet
Surface: Grass / Sod, Good Condition
End 05 End 23
Objects:   Powerlines
Object Marking:   Marked
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach
Object Height:   30' AGL
Object Distance:   0' Along centerline



Additional Remarks

Please Place on Aeronautical Charts.
Takeoff from Runway 23 only and Land on Runway 05 only.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.