Nierenberg Estate
Melbourne, Florida

FAA NFDC Information Effective 56-day cycle 08/17/2017 - 10/12/2017

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks


FAA Identifier:92FD
Lat/Lng: 28.2183444444, -80.6842202778
28-13-06.0400N, 080-41-03.1930W
Elevation: 32 feet Estimated
Magnetic Variation: 04W, (1990), [-7W (2017)]
From City: 10nm N of Melbourne


Use: Private
Airspace Analysis: CONDITIONAL
Provided VFR; Pr Use; Approach/Departure Rte Operations from 030 to 070 & from 200 to 230; Takeoff/Landing Area Marked; & Wind Indicator Maintained.
Ownership: Privately owned
Activation: 04/1993
Control Tower: no
ARTCC: Jacksonville (ZJX) Miami Center (ZMA)
FSS: Saint Petersburg FSS (PIE)
Wind Indicator: Lighted
Landing Fee: no



Based Aircraft

Total: 0

Annual Operations

Total: 0


Owner: Bruce Nierenberg
Owner: John W. Walden
700 Jordan Blass Drive
Melbourne, Fl 32940
(321) 863-8106
Manager: John W. Walden
700 Jordan Blass Drive
Melbourne, Fl 32940
(321) 863-8106


Runways: H1

Runway H1

Length: 25 feet
Width: 10 feet
Surface: Porland Cement Concrete



Additional Remarks

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.