| 94TS
Heliport
|
Mc David Honda
|
|
Irving, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | 94TS |
| Lat/Lng: |
32.8375, -96.9708333333
32-50-15.0000N, 096-58-15.0000W
Estimated
|
| Elevation: |
540 feet
Estimated
|
| Magnetic Variation: |
06E,
(1990),
[4E (2013)]
|
| Sectional: |
DALLAS-FT WORTH
|
| From City: |
3nm
SE of Irving
|
| Use: |
Private
|
| Airspace Analysis: |
CONDITIONAL
Provided Markers are Placed on Wires North & East of Heliport.
|
| Ownership: |
Privately owned
|
| Activation: |
09/1995
|
| Control Tower: |
no
|
| ARTCC: |
Fort Worth Center
(ZFW)
|
| FSS: |
Fort Worth FSS
(FTW)
|
| Wind Indicator: |
Unlighted
|
| Lights: |
for Perimeter Lights Call 214-790-6020.
|
| Landing Fee: |
no
|
|
|
|
| Owner: |
David Mc David Honda Inc
3600 West Freeway
Irving, Tx 75062
214-790-6020
|
| Manager: |
Thomas E Taylor
4201 N Main 23N
Ft Worth, Tx 76106
214-790-6020
|
|
Runway H1
| Length: |
36 feet
|
| Width: |
36 feet
|
| Surface: |
Asphalt / Bituminous Concrete
Rooftop.
|
| Runway Lights Edge Intensity: |
Perimeter Lights.
|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.