AR74
Heliport
|
Cross Ridge Community Hospital
|
Wynne, Arkansas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
FAA Identifier: | AR74 |
---|
Lat/Lng: | 35.2200886111, -90.7865019444 35-13-12.3190N, 090-47-11.4070W Estimated |
---|
Elevation: | 265 feet Estimated |
---|
Magnetic Variation: | 03E,(1985), [-1W (2024)] |
---|
Sectional: | MEMPHIS |
---|
From City: | in Wynne |
---|
Use: | Private Medical. |
---|
Ownership: | Publicly owned |
---|
Activation: | 06/1989 |
---|
Control Tower: | no |
---|
ARTCC: | Memphis(ZME)Memphis Center |
---|
FSS: | Jonesboro FSS(JBR) |
---|
Wind Indicator: | Lighted |
---|
Landing Fee: | no |
---|
|
|
Owner: | Cross Ridge Community Hospital 310 S. Falls Blvd Wynne, Ar 72396 870-238-3300 |
---|
Manager: | Gary Sparks, Administrator Tony Davis/Sheay Morgan Maintenance Dept. 870-238-3300 310 S. Falls Blvd Wynne, Ar 72396 870-238-3300 |
---|
|
Runway H1
Length: | 36 feet |
---|
Width: | 36 feet |
---|
Surface: | Porland Cement Concrete |
---|
Surface Treatment: | NONE |
---|
• | for Cd Contact Memphis ARTCC at 901-368-8453/8449. |
---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.