| CL79
Heliport
|
Sce Tiffany Pines
|
|
Shaver Lake, California
|
|
|
|
FAA NFDC Information Effective 56-day cycle 03/21/2024 - 5/16/2024
| FAA Identifier: | CL79 |
|---|
| Lat/Lng: | 37.1171944444, -119.313277778
37-07-01.9000N, 119-18-47.8000W
Estimated by Faa-Est Imagery on 05/30/2014 |
|---|
| Elevation: | 5548 feet Estimated |
|---|
| Magnetic Variation: | 15E,(1980), [12E (2024)] |
|---|
| Sectional: | SAN FRANCISCO |
|---|
| From City: | 1nm NE of Shaver Lake |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | CONDITIONAL
VFR, Private Use; Helicopters are Capable of Performing out of Ground-Effect Hover. |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 07/1986 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Oakland(ZOA)Oakland Center |
|---|
| FSS: | Rancho Murieta FSS(RIU) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | Southern California Edison Co
42696 Tollhouse Road
Shaver Lake, Ca 93664
559-841-3131 |
|---|
| Manager: | Torbjorn Corell C/O Sce Air Operations
Chief Pilot/Sr. Mgr for Southern California Edison.
7000 Merrill Ave.
Chino, Ca 91730
909-730-4107 |
|---|
|
Runway H1
| Length: | 20 feet |
|---|
| Width: | 20 feet |
|---|
| Surface: | Porland Cement Concrete |
|---|
| Surface Treatment: | NONE |
|---|
| • | for Cd Contact Oakland ARTCC at 510-745-3380. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
