| CL91
Heliport
|
Auberry Hydro Service Center
|
|
Auberry, California
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | CL91 (Charlie-Lima-Nine-One) |
| Lat/Lng: |
37.0649491667, -119.484299722
37-03-53.8170N, 119-29-03.4790W
Estimated
|
| Elevation: |
2000 feet
Estimated
|
| Magnetic Variation: |
15E,
(1985),
[13E (2013)]
|
| Sectional: |
SAN FRANCISCO
|
| From City: |
1nm
S of Auberry
|
| Use: |
Private
|
| Airspace Analysis: |
CONDITIONAL
VFR, Private Use only.
|
| Ownership: |
Privately owned
|
| Activation: |
06/1987
|
| Control Tower: |
no
|
| ARTCC: |
Oakland Center
(ZOA)
|
| FSS: |
Rancho Murieta FSS
(RIU)
|
| Wind Indicator: |
Lighted
|
| Lights: |
for Perimeter Lights Call 209-855-3523.
|
| Landing Fee: |
no
|
|
|
|
| Owner: |
Pacific Gas & Electric Co.
Po Box 425
Auberry, Ca 93602-0425
|
| Manager: |
John Moore
Pete Berumen 559-855-6008
Po Box 425
Auberry, Ca 93602-0425
559-855-6112
|
|
Runway H1
| Length: |
60 feet
|
| Width: |
60 feet
|
| Surface: |
Asphalt / Bituminous Concrete
|
| Runway Lights Edge Intensity: |
Perimeter Lights.
|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.