| CO39
Airport
|
Flying G Air Ranch
|
|
Elbert, Colorado
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | CO39 (Charlie-Oscar-Three-Nine) |
|---|
| Lat/Lng: | 39.2288638889, -104.470975
39-13-43.9100N, 104-28-15.5100W
Estimated by Owner on 08/22/2013 |
|---|
| Elevation: | 6911 feet Estimated by Owner on 08/22/2013 |
|---|
| Magnetic Variation: | 10E,(2000), [7E (2024)] |
|---|
| Sectional: | DENVER |
|---|
| From City: | 4nm E of Elbert |
|---|
| Use: | Private |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 02/2014 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Denver(ZDV)Denver Center |
|---|
| FSS: | Denver FSS(DEN) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Landing Fee: | no |
|---|
| Single Engine GA: | 2 |
|---|
| Total: | 2 |
|---|
|
|
| Owner: | Frank & Karen Graves
10444 County Rd 102
Elbert, Co 80106
303-648-3091 |
|---|
| Manager: | Frank Graves
10444 County Rd 102
Elbert, Co 80106
303-648-3091 |
|---|
|
Runway 08/26
| Length: | 3800 feet |
|---|
| Width: | 40 feet |
|---|
| Surface: | Grass / Sod |
|---|
| Surface Treatment: | NONE |
|---|
|
End 08 |
End 26 |
|---|
| Objects: | Powerline | |
|---|
| Object Marking: | Marked | |
|---|
| Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
|---|
| Object Height: | 35' AGL | |
|---|
| Object Distance: | 100' Along centerline | |
|---|
| • | for Cd Contact Denver Approach at 303-342-1916. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
