CO47
Airport
Goldys Field
Gypsum, Colorado

FAA NFDC Information Effective 56-day cycle 03/21/2024 - 5/16/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:CO47 (Charlie-Oscar-Four-Seven)
Lat/Lng:39.5999844444, -106.974211667
39-35-59.9440N, 106-58-27.1620W
Estimated
Elevation:6720 feet Estimated
Magnetic Variation:12E,(1990), [9E (2024)]
Sectional:DENVER
From City:4nm N of Gypsum

Operations

Use:Private
Airspace Analysis:CONDITIONAL
Provided a Clear 250 ft Primary Surface Width and Clear 20:1 Approach Surfaces are Established and Maintained.
Ownership:Privately owned
Activation:09/1992
Control Tower:no
ARTCC:Denver(ZDV)Denver Center
FSS:Denver FSS(DEN)
Wind Indicator:Unlighted
Landing Fee:no

Communications

Services

Based Aircraft

Single Engine GA:1
Total:1

Annual Operations

Total:0

Ownership

Owner:Gypsum Creek Ranch
Po Box 1010
Gypsum, Co 81637
303-886-9224
Manager:Carrie Goldsmith
Email: CARRIE2BAR@GMAIL.COM Other Contact: Christopher Goldsmith 316 E 25Th Apt B Cheyenne, Wy 82001 970-215-9200 GOLDSMITH.CHRISTOPHER@YAHOO.COM
Po Box 1010
Gypsum, Co 81637
303-886-9224

Runways

Runways:03/21

Runway 03/21

Length:2500 feet
Width:50 feet
Surface:Grass / Sod
Surface Treatment:NONE
End 03 End 21
Objects affecting Navigable Airspace (CFR part 77):Utility runway with a visual approachUtility runway with a visual approach

Procedures

NOTAMs

Additional Remarks

Owner Desires Airport be Charted.
for Cd Contact Denver ARTCC at 303-651-4257.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.