JY16
Heliport
Merrill Creek Reservoir
Phillipsburg, New Jersey

FAA NFDC Information Effective 56-day cycle 04/03/2014 - 5/29/2014

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:JY16 (Juliet-Yankee-One-Six)
Lat/Lng: 40.74, -75.0905555556
40-44-24.0000N, 075-05-26.0000W
Estimated
Elevation: 938 feet Estimated
Magnetic Variation: 12W, (1995), [-12W (2014)]
Sectional: NEW YORK
From City: 8nm N of Phillipsburg

Operations

Use: Private
Airspace Analysis: CONDITIONAL
VFR only; Clear 8:1 for Approach/Departure Paths; Egress/Ingress Directions be Marked on Pad.
Ownership: Privately owned
Activation: 11/1996
Attended: Continuous
Control Tower: no
ARTCC: New York Center (ZNY)
FSS: Millville FSS (MIV)
Wind Indicator: None
Landing Fee: no

Communications

Services

Based Aircraft

Total: 0

Annual Operations

Total: 0

Ownership

Owner: Merrill Creek Owners Group
34 Merrill Creek Rd
Washington, Nj 07882
908-454-1213
Manager: James Mershon
34 Merrill Creek Rd
Washington, Nj 07882
908-454-1252

Runways

Runways: H1

Runway H1

Length: 184 feet
Width: 60 feet
Surface: Asphalt / Bituminous Concrete, Good Condition

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.