Davna Corp
Millis, Massachusetts

FAA NFDC Information Effective 56-day cycle 10/15/2015 - 12/10/2015

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks


FAA Identifier:MA71 (Mike-Alpha-Seven-One)
Lat/Lng: 42.1550972222, -71.3861697222
42-09-18.3500N, 071-23-10.2110W
Elevation: 145 feet Estimated
Magnetic Variation: 15W, (1985), [-15W (2015)]
Sectional: NEW YORK
From City: 1nm W of Millis


Use: Private
Airspace Analysis: CONDITIONAL
Provided VFR Operations only; Ingress/Egress 285-090 Deg; No Operations South of Rt 109; Mark Powerlines Within 400' Radius; No Night Operations Without FAA Approved Lighting.
Ownership: Privately owned
Activation: 10/1989
Control Tower: no
ARTCC: Boston Center (ZBW)
FSS: Bridgeport FSS (BDR)
Wind Indicator: Unlighted
Landing Fee: no



Based Aircraft

Total: 0

Annual Operations

Total: 0


Owner: Davna Corporation
1575 Main St
Millis, Ma 02054
Manager: Joel Rosenfeld
1575 Main St
Millis, Ma 02054


Runways: H1

Runway H1

Length: 100 feet
Width: 100 feet
Surface: Grass / Sod
Remarks: No Operations South of Route 109.



Additional Remarks

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.