MT10
Heliport
Riverside
Kalispell, Montana

FAA NFDC Information Effective 56-day cycle 04/03/2014 - 5/29/2014

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:MT10 (Mike-Tango-One-Zero)
Lat/Lng: 48.2155138889, -114.298047222
48-12-55.8500N, 114-17-52.9700W
Estimated by OWNER on 02/05/2008
Elevation: 2930 feet Estimated by OWNER on 02/05/2008
Magnetic Variation: [14E (2014)]
Sectional: GREAT FALLS
From City: 2nm SSW of Kalispell

Operations

Use: Private
Airspace Analysis: CONDITIONAL
Provided VFR Operations and Pvt Use only; Class D Airspace Weather and Communication Rules Apply; Heliport Pilot Should Monitor Unicom for Kalispell City Airport Operations.
Ownership: Privately owned
Activation: 09/2009
Control Tower: no
ARTCC: Salt Lake City (ZLC) Salt Lake City Center (ZLC)
FSS: Great Falls FSS (GTF)
Wind Indicator: Lighted
Landing Fee: no

Communications

UNICOM: 122.800

Services

Based Aircraft

Helicopter GA: 2
Total: 2

Annual Operations

For year ending: 09/01/2007
Total: 0

Ownership

Owner: Moose Country Corp
Po Box 101
Rexford, Mt 59930
408-889-3410
Manager: Frederick Weber
Po Box 101
Rexford, Mt 59930
408-889-3410

Runways

Runways: H1

Runway H1

Length: 40 feet
by Owner on 02/05/2008
Width: 40 feet
Surface: Porland Cement Concrete, Good Condition

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.