MT41
Airport
Jefco Skypark
Whitehall, Montana

FAA NFDC Information Effective 56-day cycle 04/03/2014 - 5/29/2014

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:MT41 (Mike-Tango-Four-One)
Lat/Lng: 45.8782597222, -112.1172175
45-52-41.7350N, 112-07-01.9830W
Estimated
Elevation: 4510 feet Estimated
Magnetic Variation: 17E, (1985), [13E (2014)]
Sectional: GREAT FALLS
From City: 1nm W of Whitehall

Operations

Use: Private
Airspace Analysis: CONDITIONAL
VFR Use only
Ownership: Privately owned
Activation: 09/1988
Attended: All year Every day Daylight hours
Control Tower: no
ARTCC: Salt Lake City Center (ZLC)
FSS: Great Falls FSS (GTF)
Wind Indicator: Unlighted
Lights: Activate LIRL Runway 09/27 - CTAF.
Landing Fee: no

Communications

UNICOM: 122.800

Services

Based Aircraft

Single Engine GA: 5
Multi Engine GA: 1
Total: 6

Annual Operations

Total: 0

Ownership

Owner: Jefco Skypark Homeowners Asso
Box 148
Whitehall, Mt 59759
406-287-3441
Manager: Justin Fuhrer, Vice President
Po Box 227
Whitehall, Mt 59759
406-287-3441

Runways

Runways: 09/27

Runway 09/27

Length: 3800 feet
Width: 60 feet
Surface: Grass / Sod
Runway Lights Edge Intensity: Low Intensity
End 09 End 27
Objects: Powerline Powerline
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach
Object Height: 440' AGL 440' AGL
Object Distance: 800' Along centerline 1100' Along centerline

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.