| N33
Heliport
|
Picatinny Army Heliport
|
|
Dover, New Jersey
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | N33 |
|---|
| Lat/Lng: |
40.9578333333, -74.5281666667
40-57-28.2000N, 074-31-41.4000W
Estimated by MILITARY on 05/09/2003
|
|---|
| Elevation: |
875 feet
Estimated
by MILITARY
on 05/09/2003
|
|---|
| Magnetic Variation: |
12W,
(1985),
[-13W (2013)]
|
|---|
| Sectional: |
NEW YORK
|
|---|
| From City: |
4nm
SE of Dover
|
|---|
| Use: |
Private
|
|---|
| Ownership: |
Army owned
|
|---|
| Control Tower: |
no
|
|---|
| ARTCC: |
New York Center
(ZNY)
|
|---|
| FSS: |
Millville FSS
(MIV)
|
|---|
| Wind Indicator: |
Unlighted
|
|---|
| Beacon: |
for Helipad Perimeter Lights & Rotating Beacon Call 201-724-4609/4580.
Split-Clear-Green (Lighted Military Airport)
|
|---|
| Landing Fee: |
no
|
|---|
|
|
|
| Owner: |
State of New Jersey
Army Aviation Support Fac 2
Dover, Nj 07801
201-724-4609
Autovon 880-4609/4580 or Commercial 201-724-4580.
|
|---|
| Manager: |
Maj Michael B. Smith
Bldg 3801 Picatinny Arsenal
Dover, Nj 07801
201-724-4609
|
|---|
|
Runway H1
| Length: |
490 feet
|
|---|
| Width: |
75 feet
|
|---|
| Surface: |
Porland Cement Concrete
|
|---|
| Runway Lights Edge Intensity: |
Low Intensity
|
|---|
| • | Beacon Located Aprox 2 NM SW of Facility (240 Heading from Ahp) Activated only on Request. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
