| NH70
Heliport
|
Forbes
|
|
North Conway, New Hampshire
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | NH70 (November-Hotel-Seven-Zero) |
| Lat/Lng: |
44.0431, -71.1572222222
44-02-35.1600N, 071-09-26.0000W
Estimated by OWNER on 09/19/2008
|
| Elevation: |
540 feet
Estimated
by OWNER
on 09/19/2008
|
| Magnetic Variation: |
17W,
(1990),
[-15W (2013)]
|
| Sectional: |
MONTREAL
|
| From City: |
2nm
W of North Conway
|
| Use: |
Private
Personal Use.
|
| Airspace Analysis: |
CONDITIONAL
Provided Operations are Conducted During VFR Weather Conditions.
|
| Ownership: |
Privately owned
|
| Activation: |
08/1992
|
| Control Tower: |
no
|
| ARTCC: |
Boston Center
(ZBW)
|
| FSS: |
Bangor FSS
(BGR)
|
| Wind Indicator: |
Unlighted
|
| Landing Fee: |
no
|
| Helicopter GA: |
1
|
| Total: |
1
|
|
|
| Owner: |
Cheney North Corp
65 Carleton Way
Hales Location, Nh 03860
603-356-3652
|
| Manager: |
Steven B Cheney
65 Carleton Way
Hales Location, Nh 03860
603-387-5337
|
|
Runway H1
| Length: |
17 feet
|
| Width: |
17 feet
|
| Surface: |
Porland Cement Concrete
|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.