| NY36
Heliport
|
Adirondack Medical Center
|
|
Saranac Lake, New York
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | NY36 |
| Lat/Lng: |
44.3444444444, -74.1425
44-20-40.0000N, 074-08-33.0000W
Estimated
|
| Elevation: |
1594 feet
Surveyed
|
| Magnetic Variation: |
15W,
(2000),
[-14W (2013)]
|
| Sectional: |
MONTREAL
|
| From City: |
1nm
W of Saranac Lake
|
| Use: |
Private
|
| Airspace Analysis: |
CONDITIONAL
See Airspace Ltr Dated 10/25/00.
|
| Ownership: |
Privately owned
|
| Activation: |
06/2001
|
| Control Tower: |
no
|
| ARTCC: |
Boston Center
(ZBW)
|
| FSS: |
Burlington FSS
(BTV)
|
| Wind Indicator: |
Unlighted
|
| Lights: |
for Perimeter Lights Call 518-891-4141.
|
| Landing Fee: |
no
|
|
|
|
| Owner: |
Adirondack Medical Center
Amc @ Saranac Lake, Lake Colby Dr
Saranac Lake, Ny 12903
518-891-4141
|
| Manager: |
Patrick Facteau
Amc @ Saranac Lake, Lake Colby Dr
Saranac Lake, Ny 12903
518-891-4141
|
|
Runway H1
| Length: |
40 feet
|
| Width: |
40 feet
|
| Surface: |
Porland Cement Concrete
|
| Runway Lights Edge Intensity: |
Perimeter
|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.