| OG34
Airport
|
Meyer Riverside Airpark
|
|
Tigard, Oregon
|
|
|
|
FAA NFDC Information Effective 56-day cycle 03/21/2024 - 5/16/2024
| FAA Identifier: | OG34 (Oscar-Golf-Three-Four) |
|---|
| Lat/Lng: | 45.3998402778, -122.828987222
45-23-59.4250N, 122-49-44.3540W
Estimated |
|---|
| Elevation: | 252 feet Estimated |
|---|
| Magnetic Variation: | 19E,(1985), [14E (2024)] |
|---|
| Sectional: | SEATTLE |
|---|
| From City: | 3nm SW of Tigard |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | NOT ANALYZED
Estabd Prior to 1959. |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 05/1956 |
|---|
| Attended: | On Call Every day ON CALL (local) |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Seattle(ZSE)Seattle Center |
|---|
| FSS: | Mc Minnville FSS(MMV) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Landing Fee: | no |
|---|
| Airframe Repair: | None |
|---|
| Powerplant Repair: | None |
|---|
| Single Engine GA: | 1 |
|---|
| Helicopter GA: | 1 |
|---|
| Total: | 2 |
|---|
|
|
| Owner: | James Meyer
14730 SW Beef Bend Rd
Tigard, or 97224
503-601-9560 |
|---|
| Manager: | James Meyer
14730 SW Beef Bend Rd
Tigard, or 97224
503-601-9560 |
|---|
|
Runway 16/34
| Length: | 1585 feet |
|---|
| Width: | 100 feet |
|---|
| Surface: | Grass / Sod |
|---|
| Surface Treatment: | NONE |
|---|
|
End 16 |
End 34 |
|---|
| Objects: | Powerlines | Trees |
|---|
| Object Distance: | 10' Along centerline | 100' Along centerline |
|---|
| • | for Cd Contact Portland Approach at 503-493-7545. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
