| OG47
Heliport
|
Three Valleys Ranch
|
|
Baker City, Oregon
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | OG47 (Oscar-Golf-Four-Seven) |
|---|
| Lat/Lng: |
44.4944444444, -117.7475
44-29-40.0000N, 117-44-51.0000W
Estimated by OWNER on 01/26/2003
|
|---|
| Elevation: |
3455 feet
Estimated
by OWNER
on 01/26/2003
|
|---|
| Magnetic Variation: |
[15E (2013)]
|
|---|
| Sectional: |
SEATTLE
|
|---|
| From City: |
in Baker City
|
|---|
| Use: |
Private
|
|---|
| Ownership: |
Privately owned
|
|---|
| Activation: |
02/2005
|
|---|
| Control Tower: |
no
|
|---|
| ARTCC: |
Salt Lake City Center
(ZLC)
|
|---|
| FSS: |
Mc Minnville FSS
(MMV)
|
|---|
| Wind Indicator: |
Lighted
|
|---|
| Landing Fee: |
no
|
|---|
| Helicopter GA: |
1
|
|---|
| Total: |
1
|
|---|
|
|
| Owner: |
Three Valleys Ranch Llc
Po Box 5075, Bridgeport La
Bridgeport, or 97819
541-446-3436
|
|---|
| Manager: |
Steve Jay
Po Box 5075
Bridgeport, or 97819
541-446-3436
|
|---|
|
Runway H1
| Length: |
87 feet
|
|---|
| Width: |
54 feet
|
|---|
| Surface: |
Porland Cement Concrete
|
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
