OR83
Heliport
|
Oxbow
|
Oxbow Village, Oregon
|
|
|
|
FAA NFDC Information Effective 56-day cycle 03/21/2024 - 5/16/2024
FAA Identifier: | OR83 (Oscar-Romeo-Eight-Three) |
---|
Lat/Lng: | 44.9745277778, -116.858372222 44-58-28.3000N, 116-51-30.1400W Estimated by Owner on 01/27/2010 |
---|
Elevation: | 1700 feet Estimated by Owner on 01/27/2010 |
---|
Magnetic Variation: | 18E,(1985), [13E (2024)] |
---|
Sectional: | GREAT FALLS |
---|
From City: | 1nm E of Oxbow Village |
---|
Use: | Private |
---|
Ownership: | Privately owned |
---|
Activation: | 07/1990 |
---|
Control Tower: | no |
---|
ARTCC: | Salt Lake City(ZLC)Salt Lake City Center |
---|
FSS: | Mc Minnville FSS(MMV) |
---|
Wind Indicator: | Unlighted |
---|
Landing Fee: | no |
---|
|
|
Owner: | Idaho Power Company Po Box 70 Boise, Id 83707 (208) 388-2828 |
---|
Manager: | Ian Bock 3815 Rickenbacker St Boise, Id 83705 (208) 388-2828 |
---|
|
Runway H1
Length: | 100 feet |
---|
Width: | 100 feet |
---|
Surface: | Porland Cement Concrete |
---|
Surface Treatment: | NONE |
---|
• | for Cd Contact Salt Lake ARTCC at 801-320-2568. |
---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.