| PA34
Heliport
|
T N Ward
|
|
Bala Cynwyd, Pennsylvania
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | PA34 |
|---|
| Lat/Lng: |
40.0167788889, -75.2412916667
40-01-00.4040N, 075-14-28.6500W
Estimated
|
|---|
| Elevation: |
150 feet
Estimated
|
|---|
| Magnetic Variation: |
11W,
(1985),
[-12W (2013)]
|
|---|
| Sectional: |
NEW YORK
|
|---|
| From City: |
2nm
S of Bala Cynwyd
|
|---|
| Use: |
Private
|
|---|
| Ownership: |
Privately owned
|
|---|
| Activation: |
04/1975
|
|---|
| Control Tower: |
no
|
|---|
| ARTCC: |
New York
(ZNY)
Washington Center
(ZDC)
|
|---|
| FSS: |
Williamsport FSS
(IPT)
|
|---|
| Wind Indicator: |
Unlighted
|
|---|
| Landing Fee: |
no
|
|---|
| Helicopter GA: |
1
|
|---|
| Total: |
1
|
|---|
|
|
| Owner: |
Ward Associates
129 Coulter Ave, Po Box 191
Ardmore, Pa 19003
610-649-0400
|
|---|
| Manager: |
Ward Associates
129 Coulter Avenue
Ardmore, Pa 19003
610-565-8420
|
|---|
|
Runway H1
| Length: |
30 feet
Takeoff & Landing Area 65 Ft Diameter.
|
|---|
| Width: |
30 feet
|
|---|
| Surface: |
Porland Cement Concrete
|
|---|
| Remarks: |
Approach/Departure Paths: E 70 Deg Egress 250 Deg SE - Approach Along Rock Hill Rd to Point SE of Heliport (Aprx Over 7 N Ward 00; Shop Bldg with Windsock). Then R Turn to 310 Deg for Final Approach. Departure/Takeoff Hdg of 160 Deg with Immediate L Turn & Proceed NE Along Rock Hill Rd.
|
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
