| PA59
Heliport
|
Cast & Baker
|
|
Canonsburg, Pennsylvania
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | PA59 |
|---|
| Lat/Lng: |
40.2445147222, -80.1817238889
40-14-40.2530N, 080-10-54.2060W
Estimated
|
|---|
| Elevation: |
1246 feet
Estimated
|
|---|
| Magnetic Variation: |
08W,
(1995),
[-9W (2013)]
|
|---|
| Sectional: |
DETROIT
|
|---|
| From City: |
2nm
S of Canonsburg
|
|---|
| Use: |
Private
|
|---|
| Airspace Analysis: |
CONDITIONAL
Provided IFR Operations not Conducted; Clear 8:1 Egress/Ingress & Caution Exercised to Avoid Overflight of the Hill Church During Hrs of Worship.
|
|---|
| Ownership: |
Privately owned
|
|---|
| Activation: |
02/1996
|
|---|
| Attended: |
All year Mon-Fri 0700-1800 (local)
|
|---|
| Control Tower: |
no
|
|---|
| ARTCC: |
Cleveland Center
(ZOB)
|
|---|
| FSS: |
Altoona FSS
(AOO)
|
|---|
| Wind Indicator: |
Lighted
|
|---|
| Landing Fee: |
no
|
|---|
| Helicopter GA: |
1
|
|---|
| Total: |
1
|
|---|
|
|
| Owner: |
Cast & Baker Corp
2214 Washington Rd
Canonsburg, Pa 15317
412-745-6430
|
|---|
| Manager: |
William B. Wieland
2214 Washington Rd
Canonsburg, Pa 15317
412-746-6343
|
|---|
|
Runway H1
| Length: |
60 feet
|
|---|
| Width: |
60 feet
|
|---|
| Surface: |
Asphalt / Bituminous Concrete
|
|---|
| Remarks: |
Egress/Ingress 300 Deg/120 Deg.
|
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
