| TN68
Airport
|
River Runway
|
|
Elmwood, Tennessee
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
| FAA Identifier: | TN68 |
|---|
| Lat/Lng: | 36.1682430556, -85.8871444444
36-10-05.6750N, 085-53-13.7200W
Estimated by Faa-Est on 07/25/2023 |
|---|
| Elevation: | 493 feet Estimated by Faa-Est on 07/25/2023 |
|---|
| Magnetic Variation: | [-5W (2024)] |
|---|
| Sectional: | ST LOUIS |
|---|
| From City: | 3nm S of Elmwood |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | CONDITIONAL |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 07/2023 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Memphis(ZME)Atlanta Center(ZTL) |
|---|
| FSS: | Nashville FSS(BNA) |
|---|
| Wind Indicator: | Lighted |
|---|
| Landing Fee: | no |
|---|
| Single Engine GA: | 1 |
|---|
| Total: | 1 |
|---|
|
|
| Owner: | Gene Parish
39 Sonterra Ln
Elmwood, Tn 38560
615-788-8402 |
|---|
| Manager: | Gene Parish
39 Sonterra Ln
Elmwood, Tn 38650
615-788-8402 |
|---|
|
Runway 13/31
| Length: | 1156 feet
by Ado on 07/25/2023 |
|---|
| Width: | 45 feet |
|---|
| Surface: | Grass / Sod |
|---|
| Surface Treatment: | NONE |
|---|
|
End 13 |
End 31 |
|---|
| Right Hand Pattern: | Yes | |
|---|
| Runway Markings: | None | None |
|---|
| Elevation at End: | 484.0' MSL | 493.0' MSL |
|---|
| • | Owner Requests Airport be Charted. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
